- Home
- /Hybrid Flooring
Hybrid Flooring Melbourne
Waterproof hybrid flooring combining the best of laminate and vinyl for Australian homes.
Waterproof hybrid flooring combining the best of laminate and vinyl for Australian homes.
Get your hybrid flooring price per m² — free measure & quote.
A hybrid board is built in layers. The core is rigid — usually stone plastic composite (SPC) or wood plastic composite (WPC) — and that core is what makes the board stable and waterproof all the way through, not just on the surface. On top sits a printed timber image and a clear wear layer that takes the scratching. Most boards click together and float over the subfloor, with an underlay either attached underneath or laid first.
The short version: it is not timber and it is not a thin vinyl plank. It is a rigid waterproof board that photographs as timber and survives water the way vinyl does. That is why it has taken over so much of the Melbourne market for open-plan living areas.
Look at the edge of one board and you will usually see four layers. From the bottom up they are a backing or underlay, the rigid core, a printed film that carries the timber pattern, and a clear wear layer on top. Each layer has one job. The backing quietens the floor and takes up small bumps. The core keeps the board flat and stops it swelling. The film gives the colour and the grain. The wear layer protects that film from feet, grit and furniture.
The edges matter as much as the layers. The boards click together along a tongue and groove, so the floor is held as one sheet without glue. Some ranges on this page use an angle-to-angle click and others use a drop-lock on the short ends. Each range page lists its locking system when the maker has supplied it.
Two core types are sold as hybrid. SPC stands for stone plastic composite. It is a dense core made with limestone powder, and it is thin, hard and slow to dent. WPC stands for wood plastic composite. It is lighter and a little softer underfoot, and it is usually quieter to walk on, but a heavy point load such as a table leg can mark it more easily. Where a range page does not name the core, ask us before you order if the core type matters for your room.
Engineered timber has a real hardwood layer on top, so it has the grain, the depth and the slight variation that only real wood gives. It can usually be sanded and recoated once or twice in its life. What it does not like is standing water — a leaking dishwasher or a wet bathmat left for a week will lift it.
Hybrid gives up that real timber layer and gets waterproofing in return. If you have children, dogs, a wet-prone kitchen or a slab that holds moisture, hybrid is the easier floor to live with. If you want the genuine article in a living room and bedrooms, engineered timber is still the better floor. Many Melbourne homes use both — timber through the living zones, hybrid in the wet areas.
If you are weighing these two up, our guide on hybrid versus timber goes through the trade-offs room by room.
Both are waterproof, so the difference is in the core. A vinyl plank is flexible: it follows the shape of whatever is underneath, so any dip or bump in your subfloor will show through. A hybrid board is rigid, which means it bridges small imperfections and feels firmer underfoot.
That rigidity is the reason hybrid usually needs less subfloor preparation than a glue-down vinyl, and it is why hybrid is the more common choice for a whole-house residential floor. Vinyl still wins where you need a thin profile, a glued floor, or a commercial-grade surface.
Hybrid is usually sold between 5mm and 9mm overall. The headline thickness tells you how solid the floor feels and how well it bridges an uneven subfloor, but it is not what determines how long the floor lasts.
The wear layer does that. It is the clear top coat, measured in millimetres, and it is the part that takes the scratching from grit, chair legs and claws. A thicker wear layer is the single most useful thing to compare between two boards that otherwise look the same. For a busy family home or any commercial space, ask about the wear layer before you ask about the total thickness. Our guide to hybrid flooring thickness lists the thicknesses and wear layers of our ranges.
Most hybrid also carries an acoustic underlay, either pre-attached or laid separately. In an apartment this is not optional — many Melbourne buildings set a minimum acoustic rating for hard floors, so check your building’s rules before you choose.
Plank size changes how a room feels. The hybrid ranges on this page list plank lengths from 1,220 mm to 2,250 mm and widths from 136 mm to 230 mm, and one chevron range is cut as 305 mm by 718 mm pieces. Long, wide planks show fewer joins and suit open rooms. Shorter planks suit smaller rooms and hallways.
The finish changes how the floor looks in the light. Matte and super matt surfaces show less glare and hide fine dust better than a glossy one, and satin sits between the two. Embossed-in-register boards have a texture that follows the printed grain, so you can feel the knots under your hand. Look at a board in the light of the room it is going into if you can, because a tone that looks warm under showroom lights can look cooler in a south-facing room.
Kitchens and open-plan living are the obvious ones: one continuous waterproof floor through the busiest part of the house, with no threshold strip between the kitchen and the lounge. Laundries and bathrooms work for the same reason, provided the installation details around the wet areas are done properly.
Hallways and bedrooms are fine too, and a single floor running through makes a smaller home feel larger. The usual exception is a room with large north or west-facing glass and no window covering — strong direct sun can warm any floating floor, so talk to us about expansion gaps and board choice before you order.
We supply and install across Melbourne, including Templestowe, Palm Beach and the eastern suburbs, and we measure before quoting so the figure accounts for your actual rooms rather than a rough estimate.
Many homes in the eastern suburbs are brick veneer houses from the middle of last century, with timber floors over a crawl space or a concrete slab. An older floor like that often has a little movement, and a rigid floating board copes with it better than a thin vinyl. Newer townhouses and units are more often built on a slab, which can hold moisture, so a waterproof core is a sensible choice there.
Apartments add the building’s own rules. An owners corporation may ask for a minimum acoustic rating before it approves a hard floor, and some ranges on this page list a rating of 5 or 6 stars. Get your building’s rules first and send them to us.
A floating floor is only as good as what lies under it. The subfloor must be dry, clean, firm and flat. Makers say how much dip they accept: the Clever Choice ranges on this page list 2 mm to 4 mm over 2 metres, depending on the range. That is a small amount, and a straight edge laid on the floor shows it quickly. A slab that is out of flat is ground or levelled first, and a timber subfloor with loose or squeaking boards is fixed first.
Moisture is the other test. A slab can hold moisture, and a hybrid board does not make the slab drier. We look at the subfloor at the measure, and we tell you if it needs work before the boards go down.
Hybrid is laid as a floating floor. The boards click together and rest on the subfloor without glue or nails. A gap is left at every wall and fixed object so the floor can expand and shrink with the seasons, and the skirting boards or a scotia strip cover that gap. Melbourne can swing from a hot afternoon to a cool night within one day, which is why the gap is not optional.
Cabinets and kitchen islands should not sit on top of a floating floor, so the boards are laid up to them with the gap kept.
Grit is what wears a floor, so lift it often with a soft broom or a vacuum set for hard floors, then wipe over with a barely damp mop and a cleaner the maker approves. The board is waterproof, but water should not be left to sit in the joins. Steam mops and abrasive pads can lift edges or dull the surface, so leave them out.
Felt pads under chair and table legs stop small scratches, and a doormat at each outside door catches most of the grit. Keep the care sheet from the range you buy, because makers differ.
A photo shows colour, but not how a board feels underfoot. You can see hybrid boards at our showroom, 294 Middleborough Rd, Blackburn South, and we supply and install in suburbs across Melbourne, including Balwyn, Box Hill, Camberwell, Doncaster, Mount Waverley and Surrey Hills. Bring your room sizes or a plan if you have one, and tell us which rooms the floor is for and who lives there.
Get your hybrid flooring price per m² — free measure & quote.
Want the herringbone pattern, 100% waterproof?