Hybrid Flooring · Spec Guide
Hybrid Flooring Thickness
Every hybrid board comes with two measurements, and each one does a different job. The overall thickness is the whole board, from its backing to its surface. The wear layer is only the transparent coat on top.
This guide shows which thicknesses our hybrid ranges come in, what a thicker board changes in a room, and why two boards with the same headline figure are not always the same board.
The thicknesses our hybrid ranges come in
Most of the hybrid ranges on our site list an overall thickness between 5mm and 9.5mm. The commonest figures are 6.5mm, 7mm, 8mm and 9mm, and a small group of ranges goes up to 10mm and 12mm. A range page shows its own figure in its specifications.
- 6.5mm: Penguin 1540mm by Floortex, Guardian 6.5mm by HTT Flooring and Hybrid 6.5mm by Wonder Wood Floors.
- 7mm: Stonecore Classic 7mm by Create Timber Floor and Duro 7mm by HTT Flooring.
- 8mm: Ocean by Clever Choice and Hybrid 8mm by Wonder Wood Floors.
- 9mm: Superior by Clever Choice, Stonecore Signature 9mm by Create Timber Floor and Deluxe by Calmwalk.
- 9.5mm: Duro 9.5mm by HTT Flooring.
- 12mm: Infinite by Inovar Floor and Lifestyle Collection EPC by Preference Floors.
- Penguin 1540mm by Floortex
- Guardian 6.5mm by HTT Flooring
- Hybrid 6.5mm by Wonder Wood Floors
- Stonecore Classic 7mm by Create Timber Floor
- Duro 7mm by HTT Flooring
- Ocean by Clever Choice
- Hybrid 8mm by Wonder Wood Floors
- Superior by Clever Choice
- Stonecore Signature 9mm by Create Timber Floor
- Deluxe by Calmwalk
- Duro 9.5mm by HTT Flooring
- Infinite by Inovar Floor
- Lifestyle Collection EPC by Preference Floors
What a thicker board changes
A thicker hybrid board feels firmer when you walk on it, and it spans small dips in the subfloor better than a thin one. That is all the headline figure tells you.
It does not make the surface wear longer, and it is no cure for a subfloor that is out of flat. Every maker sets a limit for dips, and a floor outside that limit is levelled before any board goes down, whatever the board measures.
Thickness also lifts the finished floor. In a renovation, measure the gap under each door and look at where the new floor will meet a room that keeps its old one, so the step between the two is planned and not a surprise.
The wear layer is the figure to compare
A wear layer is a transparent coat laid over the printed timber pattern. It is only a fraction of a millimetre deep, yet grit, chair legs and pets work on it every day. When two boards look alike, this is the figure that separates them.
Where one of our range pages lists a wear layer, the usual figure is 0.5mm. Ocean and Superior by Clever Choice list 0.5mm marked Heavy Commercial. Deluxe by Calmwalk lists 0.7mm, and Guardian 6.5mm by HTT Flooring and Resioak Hybrids by National Select Floors list 0.3mm.
Many range pages show no wear layer at all. Do not judge two boards on thickness alone when one of them gives no figure for its surface.
When the figure includes the underlay
Some hybrid boards come with an underlay pad already attached, and the listed thickness can include it. SPC Hybrid 8mm by A Plus Materials lists its thickness as 6+1.5mm, where the second figure is the pad. Aqua Prime 1800 by Premier Building Supplies lists 7mm, made up of a 5.5mm core and a 1.5mm underlay. Resioak Hybrids by National Select Floors lists 8mm including a 2mm acoustic underlay.
So when two boards show the same headline figure, check whether one of them counts its pad. The pad has its own job: it softens the sound of the floor and absorbs small bumps. It is not part of the rigid core.
Which thickness for which home
The right figure depends on the home the floor is going into.
- An older timber subfloor with small dips: a board at the thicker end spans them better, once the subfloor is inside the limit the maker sets.
- An apartment: the owners corporation may set an acoustic rating for the floor, so read its rules before you choose a board.
- A busy family home: compare wear layers first and thickness second.
- A renovation with fixed door heights: measure the door gaps before you settle on a thick board.
Keep exploring hybrid flooring
Frequently asked questions
What thickness of hybrid flooring should I choose?+
Start with the room, not the figure. Most of our hybrid ranges list between 5mm and 9.5mm. A thicker board feels firmer and spans small dips better. It does not wear longer for that reason, because the wear layer decides that. Compare wear layers first, then pick a thickness that suits your subfloor and your door heights.
Does a thicker hybrid board last longer?+
Not because of its thickness. The part that wears is the clear layer on the surface, and its figure is listed apart from the overall thickness. A thin board and a thick board that both carry a 0.5mm wear layer have the same protection on top.
What wear layer do hybrid floors have?+
On the range pages that list one, 0.5mm is the usual figure. Two ranges list 0.3mm, and single ranges list 0.6mm and 0.7mm. Many pages list no wear layer, so look for the figure before you compare two boards.
Does the thickness of a hybrid board include the underlay?+
Sometimes. Where a pad is attached, some makers count it in the listed figure. On our site, SPC Hybrid 8mm, Aqua Prime 1800 and Resioak Hybrids each list a thickness that includes an attached underlay of 1.5mm or 2mm. Read the specification line, not only the range name.
See hybrid boards at our Blackburn South showroom
Our team measures, supplies and installs across Melbourne. Book a free, no-obligation measure and quote and we’ll call you back within one business day.
0475 588 816