Skip to main content

Engineered Timber

Chevron Flooring — and How It Differs From Herringbone

8 September 2026 · 4 min read

Chevron parquet flooring laid in a Melbourne home

Chevron and herringbone are different patterns, not two words for the same floor. How to tell them apart, why chevron costs more, and which one suits your room.

People use "chevron" and "herringbone" as if they mean the same floor. They do not. They are two different patterns, they are made differently, and one reliably costs more than the other.

Here is how to tell them apart and how to choose. If you already know chevron is what you want, our chevron flooring guide covers the ranges and how they are laid.

The difference, in one look#

Look at where two blocks meet.

Herringbone blocks have square ends. They are laid at right angles to each other, so each block finishes partway along its neighbour's side. The join steps past itself and the result is a broken zig-zag.

Chevron blocks are cut at an angle at both ends — usually 45° — and meet point to point. The join forms an unbroken V, and those Vs stack into a continuous arrow running the length of the room.

The quick test: if there is a straight seam running down the middle of each arrow, it is chevron. If the blocks step past each other, it is herringbone.

Why chevron costs more#

Two reasons, and both are about the cut rather than the timber.

Every block is mitred. A herringbone block is a rectangle with square ends — a straightforward cut. A chevron block has an angled cut at each end, and the two ends must be exactly complementary or the points will not meet. That is more machining and more waste at the factory.

Left and right are not interchangeable. Chevron needs matched left-hand and right-hand blocks in equal numbers. Order the wrong balance and half the floor cannot be laid, which is a real risk with an offcut-heavy pattern.

Installation is less forgiving too. With herringbone a fractional error is absorbed by the staggered join. With chevron the points line up down the room and any drift shows immediately.

Which pattern suits which room#

Chevron suits long, open spaces. Hallways, open-plan living areas and entries, where the arrow has room to run and the eye can follow it. It reads as contemporary and deliberate, and it rewards a plain room — simple walls and restrained furniture — because the floor is already doing something.

Herringbone is more forgiving. It suits rooms that are not quite square, which is most older Melbourne houses. It reads as traditional rather than modern, and it works in smaller rooms where a chevron arrow would be cut off before it establishes itself.

Neither is more "correct". Chevron is the sharper, more formal choice; herringbone is the classic one.

The angle changes the effect#

Most chevron is cut at 45°, which gives the familiar symmetrical arrow. Shallower angles — 30° or so — produce a longer, more stretched V that draws the eye further down the room.

A shallower angle exaggerates length, which helps a hallway and can make a square room feel oddly directional. A steeper angle is more contained. If you are choosing between ranges, the angle is worth asking about, because two chevron floors at different angles look meaningfully different once laid.

Setting out matters more with chevron#

With any parquet, the setting-out — where the first block goes and which way the pattern runs — decides whether the finished floor looks right. With chevron it decides more.

The centre line of the arrows should relate to something in the room: usually the main sightline as you walk in, or the long axis of the space. Get that wrong and the floor looks tilted rather than deliberate, even though every block is perfectly laid.

Because the points align down the room, an error at the start compounds visibly. This is not a pattern to hand to an installer who has not laid one before, and it is worth asking directly.

Which should you choose?#

Choose chevron if the room is long or open, the look you want is contemporary, and the budget has room for a pattern that costs more to make and to lay.

Choose herringbone if the room is irregular or on the smaller side, you want the traditional parquet look, or you would rather put the difference in budget into a thicker wear layer.

Both are available in more than one material, and that choice usually matters more than the pattern for how the floor lives — real oak for grain, hybrid for waterproofing, laminate for budget. Our herringbone flooring page compares the materials.

For chevron specifically — the ranges we carry, block sizes and what a floor costs — see chevron flooring in Melbourne.

Tell us the rooms below and we will come out with samples, set the pattern out on paper first, and quote supply and installation together.

Free, no-obligation quote

Get your free flooring quote

Tell us the rooms and roughly the area. We measure, bring samples, and send a fixed quote — usually back within one business day.

Prefer to talk? Call 0475 588 816 · No spam, ever.