Carpet
Carpet for Stairs: Stair Runner or Full Carpet?
19 November 2026 · 3 min read
A stair runner or a fully carpeted stair? What each one is, the fibre and pile that last on stairs, the underlay to use, and what the job involves.
Stairs are the hardest-working floor in a house, and the hardest to carpet well. Each footfall comes down on the same narrow strip of every tread, so a carpet that lasts for years in a bedroom can look tired on a staircase much sooner.
This article covers the two ways to carpet a stair, the fibre and pile that suit it, the underlay, and what the job involves.
Runner or fully carpeted: the two options#
A runner lets a handsome timber staircase be seen and needs less carpet. Carpet across the full stair is warmer and quieter, and it is kinder to a staircase whose timber is past its showpiece days.
- A fully carpeted stair covers each tread and each riser from side to side.
- A stair runner is a strip of carpet along the centre of the stair, with the timber left showing at both edges. It is held by rods, or fixed so that nothing shows.
The fibre and pile that last on stairs#
On stairs the build of the carpet matters more than in any other room. What lasts is a short, dense pile of twisted yarn. A loose or long pile, however good it looks in a bedroom, soon looks crushed and shaded on a stair.
A twist pile has one more point in its favour: footprints show on it less than on any other pile.
Crossley Twist by Belgotex is one twist pile on our range pages. It is solution dyed nylon, the fibre usually chosen where there are children or pets in the home.
Loop pile wears well too, but claws catch in the loops. In a home with a cat, or with a dog that likes to dig, keep it off the stairs.
Underlay on stairs#
Stairs take a firmer underlay than bedrooms. A soft underlay on the edge of a tread lets the carpet shift under your foot.
Stairs also call for a harder-wearing carpet than bedrooms do, and we talk you through the options that suit.
What the job involves#
Per square metre, a staircase is the slowest part of a carpet job, since the fitter cuts and fits each tread and each riser one at a time. With a runner, the pattern has to stay centred and the width has to stay the same from bottom to top, around a landing or a winder as well.
The steps are the ones of any carpet job. We measure and plan where the seams will go, take up the old floor covering, check the subfloor and repair it where needed, put down the underlay, and last of all fit the carpet and trim it.
A staircase and its landings can be carpeted as a job by themselves, with the other rooms left as they are. Estate Flooring fits carpet on stairs and landings as well as in whole homes and single rooms.
Looking after stair carpet#
Vacuum the bottom of the stairs more often than the rooms around it. Most of the grit ends up on the lowest three steps, and it is the grit that cuts carpet fibre, more than the feet do.
Where to read next#
- Carpet: our carpet ranges, with more on stairs and underlay.
- Types of carpet: what each fibre and each pile is like.