Engineered Timber · Spec Guide
Engineered Flooring Thickness
Engineered timber flooring is built in layers: a real hardwood top bonded to a cross-layered plywood or high-density core. That build is what makes it stable, but it also means there are two thickness numbers to understand before you buy — the total board thickness, and the real-timber wear layer on top.
This guide walks through the common thicknesses you will see in Melbourne showrooms, what each one feels like underfoot, and how thickness ties in with the way your floor is fixed down. When you are ready to see the difference in person, our Blackburn South showroom has boards in every thickness so you can feel them side by side.
Two numbers, not one
When a supplier lists an engineered board as, say, 15mm, that is the total thickness of the whole plank. Sitting on top of that is a separate, thinner layer of genuine hardwood — the wear layer — which might be 3mm or 4mm. The rest of the board is the engineered core that gives it strength and stops it moving with the seasons.
It is easy to mix the two up, because both are quoted in millimetres. A thick board does not automatically mean a thick wear layer. Always check both figures — the total tells you how the board sits and feels, while the wear layer tells you how long it will last and how many times it can be sanded back.
The common thicknesses, and how they feel
Most engineered flooring you will come across in Australia falls into a handful of total thicknesses. Thicker boards generally feel more solid and quieter underfoot, closer to a traditional solid timber floor, while thinner boards are lighter, easier to fit over existing floors, and often kinder on the budget.
- 12mm — the slimmest common option; light, budget-friendly and good where floor height is tight, though it can feel a touch less solid underfoot.
- 14mm to 15mm — the popular all-rounder; a solid feel at a sensible price, usually with a healthy wear layer for long life.
- 20mm to 21mm — the premium end; the closest feel to solid timber, often paired with a thicker wear layer, ideal for a forever floor.
- Under 10mm — occasionally seen for floating floors over existing hard surfaces where every millimetre of height counts.
Floating or direct-stick? Thickness matters
How your floor is fixed down changes which thickness suits. A floating floor clicks or glues together at the joins and sits over an underlay, not fixed to the sub-floor — thinner and mid boards handle this well and it is a quick, clean install. A direct-stick floor is glued straight onto the concrete slab or sub-floor, which gives the most solid feel and works beautifully with thicker boards.
Thicker planks tend to be more forgiving over small dips in the sub-floor and feel more substantial once glued down, which is why many people choose 15mm and up for direct-stick over a slab. Our fitters will look at your sub-floor and recommend the method that gives the best long-term result — it is part of every free measure and quote.
Floor height, doors and transitions
Thickness is not only about feel — it changes the finished height of your floor. Add the board and its underlay together and that is how much the floor rises. It sounds small, but a few extra millimetres can affect whether internal doors still swing clear, how the new floor meets carpet or tile in the next room, and whether skirting and door trims still line up neatly.
If you are matching a new floor to an existing one, or working around a fixed height like a sliding door track, the total board thickness is one of the first things to pin down. Bring your measurements to the showroom and we can point you to thicknesses that will sit right.
So which thickness should you choose?
There is no single best thickness — the right one balances feel, install method, floor height and budget. As a rough guide: choose 12mm when height or cost is tight, 14mm to 15mm for the best all-round mix most homes want, and 20mm to 21mm when you want the most solid, premium underfoot feel. Just remember to check the wear layer too, since that is what really drives how long the floor lasts.
The easiest way to decide is to stand on them. Come into our Blackburn South showroom, feel a 12mm next to a 20mm, and let our team match a board to your rooms — then book a free measure and quote so we can confirm what suits your sub-floor.
Keep exploring engineered timber
- Engineered timber flooring Melbourneour main engineered guide
- Wear layer explainedhow long the floor lasts
- Board widthsnarrow, standard or wide
- Wide plank engineeredthe wide-board look
- Engineered vs solid timberfeel, stability, price
- Engineered oak flooringthe go-to species
- Shop engineered rangesall products
Frequently asked questions
What is the most common engineered flooring thickness?+
In Australian homes, 14mm and 15mm are the most popular total thicknesses. They give a solid feel underfoot at a sensible price, and usually come with a healthy wear layer, which makes them a safe all-round choice for living areas.
Is a thicker engineered board always better?+
Not always. A thicker board feels more solid and can be more forgiving over an uneven sub-floor, but longevity is really set by the wear layer, not the total thickness. A 15mm board with a thick wear layer can outlast a thicker board with a thin one.
Does board thickness change how the floor is installed?+
Yes. Thinner and mid boards suit floating installs over an underlay, while thicker boards are often glued directly to a concrete slab for the most solid feel. Our fitters recommend the right method after checking your sub-floor.
Will a new engineered floor stop my doors from closing?+
It can if the height rise is not planned for. The board plus underlay adds a few millimetres, so we check door clearances and transitions to carpet or tile as part of your measure and quote, and adjust where needed.
Can I see the different thicknesses before I decide?+
Absolutely. Our Blackburn South showroom has engineered boards from 12mm through to 20mm and beyond, so you can feel the difference side by side before you choose. Pop in any time or book a free measure and quote.
See and feel every thickness in Blackburn South
Bring your floor plan and door heights — our team will match a board to your rooms and book your free measure and quote.
0475 588 816