Skip to main content

Commercial

Commercial Vinyl

Commercial vinyl in sheet, tile and plank formats, plus natural linoleum. Choose a type to see the ranges.

83 ranges4 types

Choosing commercial vinyl flooring

What makes a vinyl floor commercial

The look is not the difference — the wear layer is. Commercial vinyl carries a thicker clear layer over the printed surface, and that layer is the whole of what stands between the design and the traffic. A domestic-grade floor in a busy reception will wear through in a fraction of the time, and it fails in the walking lanes first, which is exactly where everybody looks.

Ranges are rated for the traffic they are built to take — light commercial through to heavy. Matching that rating to the room honestly matters more than any other decision on this page. A quiet consulting room and a supermarket entry are not the same problem, and no amount of specification elsewhere makes up for getting it wrong.

Slip resistance is the other half. In wet areas, kitchens and entries it is a workplace safety requirement rather than a preference, and it is expressed as an R rating — the higher the number, the more grip underfoot when the floor is wet. Tell us where the floor is going and we will tell you what rating it needs.

Sheet, tile or plank — which one, and why

Sheet vinyl comes in a roll and the seams are welded, so the finished floor is effectively one continuous surface with nothing for dirt or water to get into. At the walls it can be coved up so there is no corner at all. That makes it the standard choice wherever hygiene decides the specification — healthcare, aged care, childcare, labs, commercial kitchens.

Vinyl tile gives up the sealed surface and buys you something valuable in exchange: a damaged tile lifts out and a new one goes in, without touching the rest of the floor. In a space where one area takes punishment and the rest does not, that is the difference between a repair and a re-floor. It also allows colour zoning and wayfinding patterns.

Vinyl plank is the same idea in a timber shape. Where a space needs to read as warm rather than institutional — a café, a showroom, a waiting area, a boutique office — plank does the job that tile cannot, and keeps the replace-one-piece advantage.

Linoleum is worth separating out because it is constantly confused with vinyl and is not the same material. It is made from linseed oil, wood flour, pine rosin and jute rather than PVC. It is naturally antibacterial, its colour runs through the full thickness so a scratch does not reveal a different shade underneath, and it is made from renewable materials — which increasingly counts in tender documents. It asks for a properly prepared, dry subfloor in return.

By the space you are fitting out

Offices. Chair castors do more damage than feet ever will, so the wear layer matters most under desks. Acoustic-backed products are worth the difference in open-plan floors — the noise complaint arrives long after the flooring decision is forgotten.

Retail. Wear concentrates in narrow paths — the entry, the till, the fitting room doors — so those areas drive the specification even though they are a small part of the floor. Entries need a slip rating, because wet shoes on a hard surface is the most common complaint we hear. Replaceable formats earn their place here.

Healthcare, aged care and childcare. Hygiene decides it: welded sheet or linoleum, coved at the edges, with the slip rating the space requires. This is compliance rather than preference, and it is worth getting specified properly before anything is ordered.

Education. Heavy, constant, concentrated traffic in corridors, and a long expected life. Durability and ease of repair matter more than appearance, and holiday periods are usually the only realistic window to lay it.

Hospitality. Spills, grease, hot liquids and constant chair movement, mopped every night. Behind the counter, slip rating is a safety requirement. Front of house has more freedom, but nothing porous survives red wine.

Subfloor and installation — where jobs go wrong

Commercial vinyl is usually glued down, which means it follows the surface underneath it exactly. Every dip, ridge and trowel mark telegraphs through to the finished floor, and it is far more visible on a sheet floor under bright light than anyone expects from looking at a sample.

So the subfloor decides the result. Concrete needs to be level, sound and dry, and moisture testing is not an optional step — a slab that has not finished drying will lift a glued floor months later, and it is the most expensive commercial flooring failure there is. Where levelling is needed, it is a real cost and it belongs in the quote rather than as a surprise later.

Two details are worth settling before work starts: the coving and edge detail, which is where floors fail first and where cheap quotes quietly leave a gap, and the timing. A floor that takes three days in a trading shop costs three days of trading, and that often outweighs the price difference between two products.

Free, no-obligation quote

Get a commercial vinyl quote

Tell us the space, the traffic it takes and your timeframe, and we'll recommend the right product with a free measure and quote.

Prefer to talk? Call 0475 588 816 · No spam, ever.